SL030 Infrared Sensor

Instruction

General:

The product is an energy-saving automatic switch, it adopts integrated circuit and infrared energy detector. It can be on when one comes and off after leaves. Its performance is stable. It can identify day and night automatically. The light can turn on when one enters detection field and trigger it, and off automatically after leaves detection field.

Function:

  • Can identify day and night automatically, the ambient-light can be adjusted, so it works at night automatically and stops in the daytime.
  • Detection distance can be adjusted according to the local place.
  • Time-delay can be adjusted vary to the place.

Specifications:

Detection range:120¡ã
Detection distance: 12m (22¡æ)
Power source: 110V/AC ~130V/AC
180 V/AC ~240V/AC
Rated load: 1200W(180 ~240V/AC)
800W(110 ~130V/AC)

Working temperature:-10¡æ~+40¡æ
Working humidity: <93%RH
Time-delay: min5sec
Max8min¡À2min
Ambient-light: <10Lux~2000Lux
Installation height: 2m~4.5m

Installation:

  1. When installing connection line according to the right fig.
    N --¨C blue
    L ¨C brown
    Landyellow and green
    Red (be from infrared sensor)
    Connect blue and brown with power
    Connect blue and red with load

  2. a. Please tighten off the screw on the connection-line box, take off the rear lid of the box.
    b. according to the connection line figure and the sign on the connection line box , connect the power and load with the sensor.
    c. install the sensor in the selected position like the following diagram way.
    d. 4please cover the rear lid and tighten the screw.

Test:

  1. After installation, please turn anti-clockwise the time knob to the minimum and turn anti-clockwise the light-control knob to the minimum before you switch on the power, the sensitivity knob clockwise to the maximum value.
  2. Switch on the power; the light can be on after 30sec. After it turns off, make it to sense again after 5sec.
  3. If all are under good condition, with time adjustment knob the light period can be adjusted according to your desire, with light-control knob ambient-light can be adjusted, with sensitivity adjustment knob the detection distance can be adjusted.

Note:

      Avoid installing it where there is sunshine or air stream and temperature alter obviously.
      Avoid touching the lens Device with sharp things or coarse pollutant.